GCXseries-005
- Question
- The height is about 20cm different in NRTK.
- Answer
- Isn't the input setting of the antenna height not corrected?
- Order
- 005
GCX Series FAQs
GCXseries-006
- Question
- Cannot be recognized by PC.
- Answer
- Install the driver.
- Order
- 006
GCXseries-007
- Question
- What is the procedure for setting up a PIN code?
- Answer
- Download SRU from the website, install the PC, connect GCX3 and PC, connect with SRU, and connect. Set the pin with a number 4 digits in Bluetooth in Receiver Settings.
- Order
- 007
GCXseries-010
- Question
- What is the DGPS setting for SRU?
- Answer
- Check out Satelltes → SBAS of Receiver Settings. Check the DGNSS of Positioning of Tracking & Positioning.
- Order
- 010
GCXseries-011
- Question
- The SRU can be downloaded from where?
- Answer
- The software can be downloaded from the Topcon home page. https://positioning.topcon.co.jp/sokkia_en/application/utility/
- Order
- 011
GCXseries-012
- Question
- When connecting to a PC with a USB cable, does a USB driver need to be installed?
- Answer
- A USB driver is required. The driver can be downloaded from the Topcon home page. https://positioning.topcon.co.jp/sokkia_en/application/utility/
- Order
- 012
GCXseries-013
- Question
- Want to make a networked RTK observation, but cannot reach the state where RTK connection can be made. The lamp remains red.
- Answer
- Set the network adapter to the Internet.
- Order
- 013
GCXseries-015
- Question
- Is Galileo receivable?
- Answer
- GCX2 cannot be received. GCX3 will be optional.
- Order
- 015
GCXseries-016
- Question
-
What is the static observation method without using a controller?
- Answer
-
Press the power button three times every 2 seconds from the power ON state to start the observation record. At the end, press three times every 2 seconds of the power button.
- Order
- 016
GCXseries-022
- Question
- Is the internal battery replaceable?
- Answer
- The built-in battery can be replaced for a fee. For more details, please contact the retailer where purchased.
- Order
- 022
GCXseries-023
- Question
- How long is the battery life?
- Answer
- As a guide, it can be charged about 300 times.
- Order
- 023
GCXseries-024
- Question
- When updating the firmware, which menu in the SRU should be used?
- Answer
- It is Firmware Loading of Application Mode.
- Order
- 024
GCXseries-025
- Question
- What is required for a firmware update?
- Answer
- A PC with the SRU installed is required, plus the main unit and USB cable. Install the GCX3 USB driver on the PC.
- Order
- 025
GCXseries-026
- Question
- Tried to update the firmware, but GCX3 does not recognize it.
- Answer
- Install the USB driver.
- Order
- 026
GCXseries-027
- Question
- What cable should be used for firmware upgrade?
- Answer
- Use the USB cable included with the product.
- Order
- 027
GCXseries-029
- Question
- Is the long link Bluetooth 300m?
- Answer
- It is 300m. However, if the two points are horizontal and each other is visible, and the obstacles and elevation differences are severe, it will be shortened.
- Order
- 029
GCXseries-032
- Question
- Is it okay to leave it in a charger?
- Answer
- When it is fully charged, the charging stops. There is no overcharge.
- Order
- 032
GCXseries-033
- Question
- Is it possible to purchase only the adapter part of the charger?
- Answer
- Purchase is possible.
- Order
- 033
GCXseries-034
- Question
- Can Chinese satellites (beidou) be received?
- Answer
- GGD models can be received by adding options, and GGBD models can be received.
- Order
- 034
GCXseries-036
- Question
- What is the SRU setting for the number of epochs to start observation for a three power supply presses?
- Answer
- Connect, double left click on LogA in File Explorer to enter settings, change the number of epochs in Logging Period, OK and Disconnect.
- Order
- 036
GCXseries-038
- Question
- Is it possible to observe static without using a controller in the GCX series?
- Answer
- It is possible. Press the power three times in 2 seconds to observe, and press 3 times in 2 seconds to end the observation.
- Order
- 038
GCXseries-039
- Question
- After charging GCX2, the indicator turns red.
- Answer
- When the power is turned off, the battery LED turns red when the charge is connected to the power supply.
- Order
- 039
GCXseries-040
- Question
- How can check the remaining capacity of the data observed with the GCX series?
- Answer
- If the memory LED on the main unit is yellow, it means that the remaining capacity is low. Please delete the files inside.
- Order
- 040
GCXseries-041
- Question
- What is the reference point for height input on the GCX3?
- Answer
- The reference point for height is the bottom surface of the enclosure.
- Order
- 041