GRX3-001
- Question
-
What is the method of power-on static observation in GRX3?
- Answer
-
Press the power button three times in 2 seconds, and then press three times.
- Order
-
001
GRX3-003
- Question
-
Does GRX3 require a driver for PC connection?
- Answer
-
No driver is required. When connected to a PC with a USB cable, a virtual serial COM port is set. On the import screen, select and connect the set COM port in COM instead of USB.
- Order
-
003
GRX3-004
- Question
-
What is the standard for the terminal of the 2m GNSS antenna cable for the external antenna of the GRX3?
- Answer
-
TNC-SMB connector (antenna side TNC-body side SMB)
- Order
-
004
GRX3-005
- Question
-
What is the part where the wireless antenna is attached to the GRX3 wireless type?
- Answer
-
The antenna part is blindfolded by metal.
- Order
-
005
GRX3-006
- Question
-
During the local RTK observation in GRX3, the battery of the fixed station was gone and the power was turned off. After that, the mobile station freezes with the LED high -speed red flashing, and the power is OFF or NVRAM clear.
- Answer
-
Press the power button for more than 50 seconds and reset the battery LED to turn off. Then clear NVRAM.
- Order
-
006
