TOPCON Logo

Arrow Icon
JP
EN
Arrow Icon
Language

TOPCONロゴ

JP
JP
Country
EN
Language
Contact us
Contact us
JP
JP
Country
EN
Language

GCX Series FAQs

GCXseries-005

Question
The height is about 20cm different in NRTK.
Answer
Isn't the input setting of the antenna height not corrected?
Order
005

GCXseries-006

Question
Cannot be recognized by PC.
Answer
Install the driver.
Order
006

GCXseries-007

Question
What is the procedure for setting up a PIN code?
Answer
Download SRU from the website, install the PC, connect GCX3 and PC, connect with SRU, and connect. Set the pin with a number 4 digits in Bluetooth in Receiver Settings.
Order
007

GCXseries-010

Question
What is the DGPS setting for SRU?
Answer
Check out Satelltes → SBAS of Receiver Settings. Check the DGNSS of Positioning of Tracking & Positioning.
Order
010

GCXseries-013

Question
Want to make a networked RTK observation, but cannot reach the state where RTK connection can be made. The lamp remains red.
Answer
Set the network adapter to the Internet.
Order
013

GCXseries-015

Question
Is Galileo receivable?
Answer
GCX2 cannot be received. GCX3 will be optional.
Order
015

GCXseries-016

Question
What is the static observation method without using a controller?
Answer
Press the power button three times every 2 seconds from the power ON state to start the observation record. At the end, press three times every 2 seconds of the power button.
Order
016

GCXseries-022

Question
Is the internal battery replaceable?
Answer
The built-in battery can be replaced for a fee. For more details, please contact the retailer where purchased.
Order
022

GCXseries-023

Question
How long is the battery life?
Answer
As a guide, it can be charged about 300 times.
Order
023

GCXseries-024

Question
When updating the firmware, which menu in the SRU should be used?
Answer
It is Firmware Loading of Application Mode.
Order
024

GCXseries-025

Question
What is required for a firmware update?
Answer
A PC with the SRU installed is required, plus the main unit and USB cable. Install the GCX3 USB driver on the PC.
Order
025

GCXseries-026

Question
Tried to update the firmware, but GCX3 does not recognize it.
Answer
Install the USB driver.
Order
026

GCXseries-027

Question
What cable should be used for firmware upgrade?
Answer
Use the USB cable included with the product.
Order
027

GCXseries-029

Question
Is the long link Bluetooth 300m?
Answer
It is 300m. However, if the two points are horizontal and each other is visible, and the obstacles and elevation differences are severe, it will be shortened.
Order
029

GCXseries-032

Question
Is it okay to leave it in a charger?
Answer
When it is fully charged, the charging stops. There is no overcharge.
Order
032

GCXseries-033

Question
Is it possible to purchase only the adapter part of the charger?
Answer
Purchase is possible.
Order
033

GCXseries-034

Question
Can Chinese satellites (beidou) be received?
Answer
GGD models can be received by adding options, and GGBD models can be received.
Order
034

GCXseries-036

Question
What is the SRU setting for the number of epochs to start observation for a three power supply presses?
Answer
Connect, double left click on LogA in File Explorer to enter settings, change the number of epochs in Logging Period, OK and Disconnect.
Order
036

GCXseries-038

Question
Is it possible to observe static without using a controller in the GCX series?
Answer
It is possible. Press the power three times in 2 seconds to observe, and press 3 times in 2 seconds to end the observation.
Order
038

GCXseries-039

Question
After charging GCX2, the indicator turns red.
Answer
When the power is turned off, the battery LED turns red when the charge is connected to the power supply.
Order
039

Contact us