BuildTech
Topcon Building Construction Solution Center in Tokyo
![BuildTech Topcon Building Construction Solution Center](/content/topcon-pa/sa/en/support/buildtech/_jcr_content/root/container/container/image.coreimg.jpeg/1715597244092/buildtech-000-top-en.jpeg)
Promoting DX in the construction industry
to be Japan's first* hands-on digital measurement experience facility
"BuildTech" was established at Topcon Corporation's headquarters to provide visitors with hands-on experience of construction DX (Digital Transformation) solutions by creating a demo space that simulates a real construction site.
The entire indoor space reproduces a wide range of construction site conditions, and allows visitors to experience 3D digital measurement at each step of the construction process: marking (positioning), installation, and inspection.
Visitors can systematically learn and understand Topcon's building construction solutions, including the linkage of measured data with BIM data and how it can be used at construction sites.
*Based on our own research as of August, 2021
Contents
"BuildTech" in video
Experience digital measurement hands-on
BuildTech has a full lineup of measuring instruments and various other equipment to provide a realistic experience of measuring actual building components and models using real equipment.
You can learn about digital measurement methods through hands-on experience, which will encourage you in solving the problems you are facing.
![Experience digital measurement hands-on](/content/topcon-pa/sa/en/support/buildtech/_jcr_content/root/container/container/image_1024798440.coreimg.jpeg/1715597244194/buildtech-image-12x5.jpeg)
14 different demonstration programs are available, and more to come.
BuildTech offers demonstrations and measurement experiences that provide a hands-on understanding of 14 different solutions.
You can learn about a variety of measurements in a comprehensive manner or delve into a single measurement to understand and master it.
It can also be used as a discussion forum for the creation of new measurement methods, hardware, and software.
![14 different demonstration programs are available, and more to come.](/content/topcon-pa/sa/en/support/buildtech/_jcr_content/root/container/container/container/container_1989098587/container/image.coreimg.jpeg/1715597244318/buildtech-demo-00-en.jpeg)
![Staking out groundwork](/content/topcon-pa/sa/en/support/buildtech/_jcr_content/root/container/container/container/container_1989098587/container_649555594/image.coreimg.jpeg/1715597244373/buildtech-demo-01.jpeg)
1. Layout work using LN and BIM/CAD design data.
![Setting batter boards](/content/topcon-pa/sa/en/support/buildtech/_jcr_content/root/container/container/container/container_1989098587/container_649555594_/image.coreimg.jpeg/1715597244439/buildtech-demo-02.jpeg)
2. Installation of batter boards for foundation using LN.
![Pile Centering/Confirm center deviation](/content/topcon-pa/sa/en/support/buildtech/_jcr_content/root/container/container/container/container/container_649555594_/image.coreimg.jpeg/1715597244520/buildtech-demo-03.jpeg)
3. Layout work and inspection of piles using LN and BIM/CAD data.
![Verification of foundations](/content/topcon-pa/sa/en/support/buildtech/_jcr_content/root/container/container/container/container/container_649555594__1048009910/image.coreimg.jpeg/1715597244578/buildtech-demo-04.jpeg)
4. Verification of foundations using BIM models.
![Verification of anchor positions](/content/topcon-pa/sa/en/support/buildtech/_jcr_content/root/container/container/container/container/container_649555594__1220315646/image.coreimg.jpeg/1715597244631/buildtech-demo-05.jpeg)
5. Verification of anchor bolt positions using LN.
![Verification of piping layout](/content/topcon-pa/sa/en/support/buildtech/_jcr_content/root/container/container/container/container/container_649555594__1556402614/image.coreimg.jpeg/1715597244684/buildtech-demo-06.jpeg)
6. Overlay comparison of CAD drawings and scanned data.
![Accuracy check for column erection](/content/topcon-pa/sa/en/support/buildtech/_jcr_content/root/container/container/container/container_1060635367/container_649555594_/image.coreimg.jpeg/1715597244763/buildtech-demo-07.jpeg)
7. Real-time verification of steel columns plumbness using LN.
![Verification of columns and beams](/content/topcon-pa/sa/en/support/buildtech/_jcr_content/root/container/container/container/container_1060635367/container_649555594__1079984421/image.coreimg.jpeg/1715597244845/buildtech-demo-08.jpeg)
8. Comparison of BIM model and scan data for columns and beams.
![Verification of concrete flatness](/content/topcon-pa/sa/en/support/buildtech/_jcr_content/root/container/container/container/container_1060635367/container_649555594__227501905/image.coreimg.jpeg/1715597244896/buildtech-demo-09.jpeg)
9. Evaluation of concrete floor flatness using scan data and software.
![Verification of gradients](/content/topcon-pa/sa/en/support/buildtech/_jcr_content/root/container/container/container/container_1060635367/container_649555594__740207435/image.coreimg.jpeg/1715597244946/buildtech-demo-10.jpeg)
10. Evaluation of concrete slope gradients using scan data and software.
![MEP marking work](/content/topcon-pa/sa/en/support/buildtech/_jcr_content/root/container/container/container/container_1522790979/container_649555594_/image.coreimg.jpeg/1715597245025/buildtech-demo-11.jpeg)
11. Navigation of MEP layout markings using LN.
![Modeling of MEP plumbing](/content/topcon-pa/sa/en/support/buildtech/_jcr_content/root/container/container/container/container_1522790979/container_649555594__693497594/image.coreimg.jpeg/1715597245083/buildtech-demo-12.jpeg)
12. Creation of BIM models of plumbing and structural members using scan data.
![Furring strips/foundation inspection](/content/topcon-pa/sa/en/support/buildtech/_jcr_content/root/container/container/container/container_1522790979/container_649555594__200831509/image.coreimg.jpeg/1715597245136/buildtech-demo-13.jpeg)
13. Verification of interior wall placement.
![Confirm heat insulator thickness](/content/topcon-pa/sa/en/support/buildtech/_jcr_content/root/container/container/container/container_1522790979/container_649555594__74075945/image.coreimg.jpeg/1715597245188/buildtech-demo-14.jpeg)
14. Verification of insulation thickness using scan data.
Virtual demonstrations are also available.
BuildTech equips cameras and mixers available for streaming.
We can remotely demonstrate instruments to hold any session for a distant location or for multiple locations at the same time.
Demonstration menus can be selected from the 14 programs shown above.
![Virtual demonstrations are also available.](/content/topcon-pa/sa/en/support/buildtech/_jcr_content/root/container/container/container_393876021/image.coreimg.jpeg/1715597245278/buildtech-streaming-16x9.jpeg)
For those who wish to visit
Location of BuildTech
BuildTech is located at Topcon Corporation Headquarters in Tokyo.
Address:
75-1, Hasunuma-cho, Itabashi-ku, Tokyo 174-8580, Japan
Subway:
Approx. 10 minutes' walk from Motohasunuma station Exit A-2 on the Toei Mita Line
Train:
From Akabane station West Exit on the JR Line,
Approx. 10 minutes by Kokusai Kogyo bus (220 yen)
From Tokiwadai station (Route No.53) (see MAP-2) Approx.
1 minute walk from
Akabane-nishi 6-chome bus stop
Taxi:
Approx. 10 minutes by Taxi (730 yen to 910 yen)
Book a visit
For any inquiries or reservations relating to visiting, please contact us at the details below.
Frequently asked questions
Please check the BuildTech FAQ by clicking the button below.
![TOPCON CORPORATION](/content/topcon-pa/sa/en/support/buildtech/_jcr_content/root/container/container/container_2031503100_1735913543/container_copy_copy_/image_2090626776_cop.coreimg.jpeg/1715597245570/thq-16x9.jpeg)