LN-100_LN-150-001
- Question
-
Please tell me the specifications of the main unit's LED.
- Answer
-
［Wireless LAN LED］Flashing green indicates waiting to receive. Solid green indicates receiving. ［Power LED］Flashing red indicates low battery. Solid green indicates power ON. ［Auto Leveling LED］Flashing green indicates within leveling range. Flashing red indicates outside leveling range. Solid red indicates beyond leveling range.
- Order
-
001
LN-100_LN-150-002
- Question
-
Please tell me the frequencies supported by Wi-Fi.
- Answer
-
This device supports Wi-Fi frequencies at 2.4GHz band only.
- Order
-
002
LN-100_LN-150-003
- Question
-
Please tell me how to reset the Wi-Fi settings.
- Answer
-
After turning on the power, immediately press and hold the protruding button on the battery compartment until you hear a beep.
- Order
-
003
LN-100_LN-150-004
- Question
-
Does it have an auto power-off function?
- Answer
-
If there is no key operation or communication for 30 minutes, the power will automatically turn off. Settings cannot be changed.
- Order
-
004
LN-100_LN-150-005
- Question
-
Please tell me the Wi-Fi security settings and password.
- Answer
-
The security is WPA2, and the password is “00 followed by the device number”.
(For example, if the device number is “LZ00123”, the password is “00LZ00123”.)
- Order
-
005
LN-100_LN-150-006
- Question
-
Is there a battery level indicator?
- Answer
-
If the power LED changes from steady green to flashing red, this indicates a voltage drop.
- Order
-
006
LN-100_LN-150-007
- Question
-
Please provide the diameter, mass, and accessories for the Hand Grip SB190.
- Answer
-
32mm x 200mm, 350g
The included accessory is a hex wrench.
- Order
-
007
LN-100_LN-150-009
- Question
-
I want to mount it on a tripod. Is the screw diameter the same as the Levels screw?
- Answer
-
They have the same screw diameter.
- Order
-
009
LN-100_LN-150-010
- Question
-
What does the red flashing power indicator mean?
- Answer
-
Low voltage. Replace with a charged battery.
- Order
-
010
LN-100_LN-150-011
- Question
-
Please tell me how to reset the wireless LAN.
- Answer
-
(Note: Pressing this button will reset the settings to factory defaults. You will need to reconfigure WLANConfig for LN-100 from scratch.) Set the wireless LAN mode to Mode A and turn the power ON. While the wireless LAN LED is blinking, press and hold the reset switch inside the battery box until you hear a “beep.”
- Order
-
011
LN-100_LN-150-012
- Question
-
Is it possible to use the prism sheet type with the LN-150 for tracking or sighting?
- Answer
-
Not available.
- Order
-
012
LN-100_LN-150-013
- Question
-
The wireless lamp is lit green, and I cannot connect to the terminal. Please tell me what the green light means.
- Answer
-
The green light indicates that the device is already connected. Please check the communication of other devices you believe are connected.
- Order
-
013
